This is the detailed operation procedure. If you will not operate after receiving the goods, please contact email: wenduanluo@gmail.com
1, clean the mold: do not leave water stains, black spots and so on, and then apply Vaseline
2, take out the electronic scale, turn on the switch, put the measuring cup, according to the peel on the electronic scale, pour A glue and B glue, the ratio of A glue and B glue can be 1:1, can also be 1:1.3. (The more B glue, the more soft, more viscous) such as A glue is 40g, B glue is 52g, after pouring, stir with a stirring stick for 1-2 minutes;
3. Dip a toothpick into some color paste, dip a little inside the glue on the wall of the measuring cup and stir it, then mix the color paste with the glue with a mixing stick, pay attention to scraping along the wall of the cup and scraping at the bottom to avoid settling the color paste, stir for 3-4 minutes, and then leave it for 2-3 minutes.
4. Take out the mold, pour the adjusted glue, shake the mold after pouring, which is helpful for defoaming, put it in a ventilated place, and wait for 6 hours;
5, demoulding, can be placed in the water demoulding, slowly out along the side, wrapped with flocking or add jewelry, can be bagged
